{{product['name']}}

Holy Warrior's SIG SAUER TANGO 6T DVO 1-6X24mm type short scope. 　
A set of 1-6x variable magnification scope and Badger Ordnance C.O.M.M.

The TANGO 6T in the actual product is the successor to the military scope "ACOG" that has supported the US military for a long time, and is a 1-6 magnification variable used by the US Army's marksman rifle and the US Special Forces. It is a scope of the genre called low magnification variable scope (LPVO: Low Power Velocity Optics) with magnification.

This HW product is a replica scope modeled after the TANGO 6T, and includes a scope body, a 1.54-inch high scope mount, a lens cap, and a power selector ring throw lever.
It reproduces the same functions as a real gun product, making it a high-quality finished scope, and when used at low magnification, the sight view can be used at almost the same size, making it easy to use even at close range. It can also be used in narrow fields.

The scope can be adjusted from the same magnification as the naked eye (1x) up to a maximum of 6x, and the magnification can be easily adjusted by turning the large magnification adjustment ring equipped with a light collecting fiber on the eyepiece side.
In addition, by installing the included throw lever, it is possible to perform reliable operation without slipping even when looking into the scope.

The second focal plane (SFP: Second Focus Plane) is adopted for the operation method of the lens, and the same sight view can always be obtained at all magnifications without changing the size of the reticle.

The reticle is a reticle that reproduces the DWLR-6, and there is a circle like a horse's shoe in the center of the reticle, and a small dot is displayed in the center of the circle.
Around 3, 6, and 9 o'clock, thick lines extend toward the center of the scope, making it easier to find the reticle itself.

The illumination function is also reproduced, and the light intensity can be adjusted in 11 steps.
Only the circle in the center of the reticle and the dot in the center of the circle glow red.
The illumination function can be turned ON/OFF and the amount of light can be adjusted with the dial ring on the left side of the main unit.
NV1, NV2, and 1 to 9 are marked. NV1 state is the lowest light intensity, 9 state is the maximum light intensity, and "・" between each position is the OFF state.
The dial ring is equipped with a lock function to prevent the light from turning off unexpectedly. When dialing, pull the ring outward to unlock and operate.

A focus adjustment ring is provided on the eyepiece side to correct any focus deviation due to magnification. The elevation (up/down) and vintage (left/right) adjustment dials for zero-in are attached to the protective cap in the center of the scope body. Remove it to reveal the adjustment dial.

spec
Size: about 260 x 68 x 60mm
Magnification: Approximately 1-6 times (steplessly variable)
Scope weight: about 578g (body only)
Illumination: Red
Eye relief: about 80 - 135mm
Main material: Aluminum alloy, etc.
Battery used: CR2032 x1 (not included)