Equipped with shoot and recoil engine: The weight is activated at the same time as the launch by pulling the trigger, and the strong reaction generated inside the main body is transmitted to the whole body. In addition, an automatic stop system that stops the firing operation when the magazine is empty is adopted. It is a model that pursues the reality of operation and operability.
Belt link gimmick: Pull out the belt link from the magazine set in the main unit, open the main unit's feed cover and set the belt link. The belt link with metal dummy cartridges moves as if it is feeding in conjunction with the firing operation.
Detachment of the barrel: When replacing the battery, the barrel is removed with the inner barrel. The inner barrel is divided, and when the barrel is removed, a part of the inner barrel and the chamber remain on the main body.
Sight adjustment: Rear sight can be adjusted up, down, left and right in the same way as the real site. The front site can be adjusted up and down.
Built-in FET: Reduces the burden on the switch unit by adopting an FET (electronic switch method). It also has sensors such as the trigger function OFF when the barrel is removed and the feed cover is opened, the auto-stop system that stops operation when it detects the remaining bullets in the continuous magazine, and the LED indicator that displays the status of the FET and battery.
Luxurious accessory: A special bipod that reproduces the round cross section is included. The legs can be folded. Also included is a 1000 denier nylon carrying case for convenient storage and transport. Two original patches are also included.
Compatible with various muzzle options: If you remove the muzzle flash hider, you can install a muzzle option with a 14mm reverse screw specification such as a silencer.
Box-type continuous magazine: Comes with an electric hoisting box-type magazine with 1,000 rounds.