{{product['name']}}

*This product cannot be used with a tactical Remote Pressure Switch

- 3 NiteLab UHi 40 MAX LEDs, output 9900lm, range 510m, 65,400cd

- 24 LED floodlight array beads

- Double buttons at the tail, two-stage design

- Built-in 5000mAh battery. Support 18W QC USB-C fast charging

- Fast charging with a QC adapter can charge about 80% in 1h45m

- Full/half locking, distance sensing, preventing accidental start

- Optional NTR10 tactical ring for more stable holding

- IP68 waterproof level, 1 meter drop resistance

- Length 125mm x Diameter 40mm

- Weight 218.5g

- Can be equipped with Nitecore diffuser, diffuser or traffic stick. It has a wider range of applications

Charge

TM9K Pro comes with a smart charging function. Please charge it before using it for the first time.

Connecting to the power supply: This product has normal charging mode and QC fast charging mode optional. As shown in the picture, open the rubber plug of the charging port on the barrel, connect one end of the USB power cord to the charging interface, and connect the other end to the power supply (adapter, power bank or other charging device) to charge.

• When the flashlight is charging normally, when it detects that the adapter supports QC fast charging, it will automatically enter the fast charging mode and the battery indicator light will flash quickly.

• When the flashlight is charged in the normal charging mode, the battery indicator light flashes slowly to prompt.

• When charging is completed, the flashlight will automatically stop charging and the battery indicator light will stay on.

• When the flashlight is turned on and connected to the power source for charging, the lighting will automatically turn off. After cutting off the power, the memory gear will be automatically reopened.

• QC fast charging time is about 3 hours and 15 minutes, normal charging time is about 5 hours (5V/2A adapter).

Note: When charging in locked state, the flashlight will automatically unlock.

Tactical lighting

• In the off state, press and hold the MODE button, the flashlight will turn on the search mode, let go and the flashlight will turn off.

• In the off state, the flashlight goes out when you let go. MODE button, turn on the Lumen ShieldTM with the flashlight, press and hold again

on/off

* Turn on: In the off state, press the switch button again until there is a "click" sound and then let go, and the flashlight will turn on.

• Off: In the on state, press the switch button again until there is a "click" sound and then let go, and the flashlight will turn off.

Brightness adjustment

When it is on, every time you press the switch button, the brightness will cycle through the sequence of "energy-saving gear - low brightness gear - medium brightness gear - high brightness gear". TM9K Pro is equipped with a memory function. It can remember the current gear after it is turned off, and it will automatically enter the current gear the next time it is turned on.

Turn on search block

In the on/off state, long press the MODE button without letting go to turn on the search mode, and let go to return to the previous use state.

TM Turn on Lumen Shield™™

In the on/off state, long press the MODE button without letting go to turn on the "Lumen Shield", and let go to return to the previous use state.

lock/unlock

TM9K Pro has semi-locking mode and full locking mode optional.

Semi-locked mode:

• When it is on, press and hold lightly/long press the switch button again until the flashlight flashes 1

After lowering and releasing, you can enter the semi-locking mode.

• In the semi-locked mode, the switch button is in a locked state. Press the switch button lightly and long/press the switch button hard and long to light up the battery indicator light and turn it off when you release it.

• In semi-locked mode, long press the MODE button to enter the search mode; long press the MODE button to enter the Lumen Shield™

Full lock mode (factory default mode):

• When it is on, press and hold lightly/long press the switch button until the flashlight flashes 3 times and then let go to enter full lock mode. After entering full lock mode, the battery indicator light will flash to report the battery voltage (accurate to ±0.1V). For example, when the battery voltage is 4.2V, the indicator light will flash 4 times, pause for 1.5 seconds and then flash 2 times to indicate 4.2V.

• After entering full lock mode, all keys are locked. Light and long press/heavy long press on all buttons will light up the battery indicator light and turn off when you release it.

Unlock: In any locked state, quickly press the switch button 3 times to unlock the state, and the flashlight will turn on the lighting, indicating that the flashlight is successfully unlocked.

ATR temperature control module

TM9K Pro has a built-in temperature control module that automatically adjusts the brightness output according to the working status and external temperature to achieve the best working status.

Battery reminder

When turned on, the battery indicator light will indicate the remaining battery power:

1. The indicator light is always on, which means the battery capacity is greater than 50%;

2. The indicator light flashes slowly, which means the battery capacity is less than 50%;

3. The indicator light flashes quickly, which means the battery power is less than 10%.

Note: When the battery power is low, the brightness of the flashlight will dim or cannot be dimmed. At this time, the flashlight should be charged as soon as possible.

Light sensing obstacle avoidance function

When there is an obstruction near the light outlet of the flashlight and the highlight block/lumen shield M/search block is accidentally turned on, the brightness of the flashlight will automatically be reduced to 500 lumens to prevent the product from overheating and effectively protect the service life of the flashlight. Due to the different colors and materials of the obstruction, the sensitivity of the sensor will be different. After removing the obstruction, the flashlight will restore its previous brightness and turn off the obstacle avoidance function.

Note:

1. If you turn on Highlight Block/Lumen Shield™/Search Block first, and then block the light outlet of the flashlight, the flashlight will not activate the obstacle avoidance function and the brightness will be output normally.

2. Please keep the flashlight lens clean to ensure that the built-in sensor works properly and achieves optimal performance.