{{product['name']}}

Manufacturer: Tokyo Marui
Size
Battery: Approx. 131 x 16.6 x 16.8 mm (excluding connector and cable)
Charger: Approx. 90.5 x 80 x 27.5 mm (excluding AC adapter)
Cable Length
Battery: Approx. 100 mm
AC Adapter: Approx. 50 mm
Weight
Battery: Approx. 55 g
Other Battery Information
2 cells (series connection) / Nominal Voltage: 7.4 V / Usable Voltage: 6.0 V to 8.4 V / Nominal Capacity: 800 mAh / Protection Features: Over-discharge Protection, Over-charge Protection, Discharge Overcurrent Protection, Short-Circuit Protection, 0V (Zero Volt) Charging Inhibition
Other Charger Information
Charging Method: CC-CV / Charging Voltage: Max. 8.38 V ± 5 mV / Charging Current: Max. 1 A / Discharge Capacity: 0.5 A (Fanless) / Discharge End Voltage: 7.7 V (※1)
※1: In storage mode, discharging stops at 7.7V, and charging stops at 7.6V.

MS Li-Po Battery and Safety Charger Set Now Available

[MS Li-Po Battery]
■ Equipped with five protection functions using a dedicated IC
■ Equipped with a temperature sensor (temperature is determined by the airsoft gun or charger)
■ Cell management by internal circuitry (balance charging not required※1)

[MS Li-Po Safety Charger]
■ Equipped with six protection functions to handle various abnormal conditions
■ Equipped with storage mode
■ Equipped with a buzzer to notify of abnormal conditions and charging completion
■ Quiet, fanless design

≪Key Features≫
◆ Slim Li-Po Battery: This 7.4V 800Ah Li-Po battery is cold-resistant and has low self-discharge. It is slimmer and more compact than conventional NiMH AK batteries. Its high output also improves the response time from trigger pull to BB firing. ◆ Five Protection Functions (Battery): The battery is equipped with built-in protection functions to protect both the battery and the user from overcharging, over-discharging, short circuits, and other problems. [1] Over-discharge Prevention Function [2] Overcharge Prevention Function [3] Discharge Overcurrent Protection Function [4] Short Circuit Protection Function [5] 0V (Zero Volt) Charging Prohibition Function
◆ Temperature Sensor (Battery): The battery's built-in temperature sensor allows the charger and electric gun compatible with MS/Li-Po batteries to detect the battery temperature. Operation will cease if the battery temperature is abnormal or outside the operating range.
◆ MS/Li-Po Battery Charger: This charger is designed specifically for Tokyo Marui MS/Li-Po batteries*. The battery's built-in protection functions and temperature sensor, along with various built-in protection functions, ensure safer charging, use, and storage of Li-Po batteries. *This product cannot be used with any other than genuine Tokyo Marui Li-Po batteries.
◆ Various Protection Functions (Charger): Six protection functions monitor battery temperature, charging current, charging voltage, and other factors to prevent overheating and other problems. [1] Battery temperature abnormality detection [2] Battery voltage abnormality detection [3] AC adapter input voltage abnormality detection [4] Charging/discharging protection timer [5] Charging current abnormality detection [6] Battery temperature warning display
◆Storage mode (charger): The storage mode adjusts the battery voltage for storage. Pressing the "STOR" button checks the battery's condition and automatically charges/discharges until the battery voltage is appropriate for storage.
◆LED and buzzer status notification (charger): The standby, charging, and storage mode statuses are indicated by a lit/blinking indicator and a beep. In addition, if an abnormality is detected, the indicator flashes and the buzzer sounds to notify you of the specific problem.
◆[!] Always use products compatible with MS Li-Po batteries: Be sure to have the fireproof "MS Li-Po Safety Bag" (sold separately) ready just in case.