HRF SKIFF REPLICA

This is an HRF SKIFF laser riser replica.

This mount allows you to attach an aiming device directly to the UNITY FAST MICRO MOUNT (including Micro-S). It can simultaneously mount a red dot sight and an aiming device, and its optimized center of gravity and mounting position support the fastest aiming even when equipped with a gas mask or NVG.

The 20mm rail can be equipped with aiming devices such as the LA5, DBAL, and NGAL.

Note: This product cannot be used on its own. A separate WADSN UNITY MICRO MOUNT replica is required for installation.

Compatible Mounts

■WADSN UNITY FAST MICRO MOUNT Replica

《Installation Ease》
★☆☆☆☆

Insert the SKIFF into the UNITY MICRO MOUNT and secure it with the plate and screws from the other side.

*When installing on a FAST Micro Mount other than the WADSN version, adjustments such as machining or tape may be required.

Compatible Aiming Devices

■Compatible with all aiming devices with 20mm rails

《View Obstruction when Combined with Aimpoint Micro T1/T2》

NGAL: Approximately 1/10
PEQ-15 LA5/LA5C: Approximately 1/5
CQBL-1: Approximately 1/5
DBAL A2: Approximately 1/3

Benefits of Installing a SKIFF

Mounting an aiming device on a 20mm rail mount that protrudes forward offers three benefits.

■1. Mount two types of optics in a small space
PDW-type airsoft guns have limited space in the handguard, making it difficult to mount optics depending on the switch and light selected. However, by using SKIFF, you can mount a red dot sight and aiming device in a small slot, expanding the scope of customization. It also eliminates the need to change your hand position when holding the gun.

■2. Improved handling
The heavier the tip of an airsoft gun, the harder it is to handle a rifle or SMG, making it difficult to aim quickly and accurately. However, by using the SKIFF mount, you can mount all optics together near the center, improving the center of gravity and improving handling.

■3. Maintaining zeroing
With M4-type guns in particular, the handguard can become distorted when it hits a barricade or other object hard, causing the laser to lose zeroing. The SKIFF aiming device can be attached to the frame, so zeroing will not be affected even if the handguard is distorted.

Authentic engraving included

The white markings on the sides are realistically reproduced just like the real thing, adding a cool accent.

How to install

Place the mounting bracket inside the FAST MICRO MOUNT and secure it with the included hex screws.

Contents

• 1 x SKIFF replica
  1 x mount fixing part
  1 x hex screw